供應奧創電子 制動電阻（Braking resistor） 相關信息由 廣東奧創電子科技有限公司提供。如需了解更詳細的 供應奧創電子 制動電阻（Braking resistor） 的信息，請點擊 http://m.qnon.net/b2b/wwwautroucom.html 查看 廣東奧創電子科技有限公司 的詳細聯系方式。
在制動電阻選型過程中需要考慮的兩大主要因素是功率和阻值，而對于溫度的考量，在現行的國家標準中，并沒有關于制動電阻溫度的規定，而且現行的《電阻器基本技術條件》中關于電阻器極限溫升的規定也只從電阻器的運行狀況和人身安全角度考慮。
但是在制動系統中，除了要考慮電阻的運行情況外，還要從整個制動系統來衡量，比如在電梯系統中如果機房溫度過高，會對控制柜的變頻器等各種電子設備的散熱產生影響。我們都知道，制動電阻主要是將再生電能轉化為熱能散發到空氣中，直接影響的是整個制動系統的工作環境溫度。
因此在選型時需要綜合考慮電阻的使用環境等再確定功率和阻值，并且在安裝操作中還需要注意以下問題：
1、避免將制動電阻和變頻器安裝的太靠近。
2、必須保證制動電阻有足夠的的散熱空間，必要時安裝散熱裝置。
3、電阻的接頭處必須安裝穩固，避免電纜因長時間高溫受損。
4、連接電纜長度不宜過長，避免斬波干擾。
In the selection process of brake resistance, two main factors need to be considered are power and resistance value. For the consideration of temperature, there is no stipulation on the temperature of brake resistance in the current national standard. Moreover, the stipulation on the limit temperature rise of resistor in the current Basic Technical Conditions of Resistors only considers the operation condition and personal safety of resistor.
But in the braking system, besides considering the operation of resistance, it also needs to be measured from the whole braking system. For example, if the room temperature is too high in the elevator system, it will have an impact on the heat dissipation of various electronic equipment such as the frequency converter of the control cabinet. As we all know, brake resistance mainly converts regenerated electric energy into heat energy and emits it into air, which directly affects the working environment temperature of the whole brake system.
Therefore, when choosing brake resistance, we need to consider the use environment of resistance comprehensively to determine the power and resistance value. In addition, we need to pay attention to the following problems in installation operation:
1. Avoid installing brake resistance and frequency converter too close.
2. It is necessary to ensure that the brake resistance has enough heat dissipation space and install heat dissipation devices when necessary.
3. The joint of resistance must be installed firmly to avoid cable damage due to long time high temperature.
4. The length of connecting cable should not be too long to avoid chopper interference.
