SK-1800 GF Thermal Gap Filler
Yellow / Two Part Silicone-based / Thermally Conductive Gap Filler
INTRODUCTION
SK-1800 GF Thermal gap filler is a two part liquid silicone-based material, curing at room temperature once mixed. SK-1800 GF is a soft and compressible material designed to dissipate heat from electronic devices such as PCB modules by conducting it to a heat sink such as an aluminum housing.
Unlike cured thermal pad materials, SK-1800 GF thermal gap filler is supplied as a two-part liquid component kits. When the liquid components are thoroughly mixed either by weight or volume, the mixture cures to a soft elastomer. These elastomers cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement. SK-1800 GF has long term performance stability during temperature cycling up to 200℃.
SK-1800 GF thermal gap filler is used for smartphones, portable computing devices, LED lighting modules, PCB modules, communication equipment and electric vehicle parts, provide a reliable cooling solution.
FEATURES Two-part 1 : 1
Low interface stress
Optimized dispensing Thermal conductivity 1.8 W/m.K
Room temperature curing
Easy to rework
TYPICAL APPLICATIONS Portable electronics
LED lighting modules
SSD Automotive electronics
Telecommunications
ECU BMS
TYPICAL PROPERTIES
Composition Silicones
Appearance A : Yellow / B : White
Mix Ratio by Weight A：B=1：1
Specific Gravity 2.6 g/cm3
Viscosity @ 25℃ 250,000 cPs
Thermal Conductivity 1.8 W/m.K
Thermal Resistance Min. （@50psi) ≤0.08 ℃ in2/W
Hardness 45 Shore OO
Dielectric Strength （@1mm） ≥10 KV
Volume Resistivity ≥1.0*1013 Ω.cm
Dielectric Constant 6.5 （@1 MHz）
Low Volatility Content（D4-D20） ≤100 ppm
Use Temperature range -60℃ - 200℃
Flammability Rating V-0
RoHS Compliant Yes
Thermal Resistance vs.Thinknes
SK-1800GF
HOW TO USE Mix ratio Two part，A：B=1 : 1 （by weight/volume）
Pot life
Cure Condition 60min @ 25℃
5 hours @ 25℃ or 10~15 minutes @ 100℃
STORAGE 1.Containers should be kept tighly closed and head or air space minimized.
2.Shelf life is 6 months after the packaged date.
PACKAGING
Available packaging size
50cc dual cartridge kit
400cc dual cartridge kit
10 gallon kit
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
LIMITED WARRANTY
INFORMATION The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Safid’s sole warranty is that our products will meet the sales specifications in effect at the time of shipment.
蘇州薩菲德新材料科技有限公司是一家集研發、制造、銷售為一體的新型材料生產企業；
多年來，公司一直致力為客戶提供全面的導熱緩沖及粘接、密封、涂覆材料等解決方案；
公司主要生產，導熱材料、導熱凝膠、gap filler、gap filler1500、gap filler3500、導熱片、導熱墊片、導熱矽膠片、矽膠導熱片、硅膠導熱片、導熱硅膠片、導熱絕緣片、導熱粘接膠、導熱硅脂、導熱灌封膠、導熱絕緣片、導熱絕緣墊片、導熱陶瓷片、導熱矽膠片、車充導熱片、車燈模組導熱、通信電源導熱片、無線充導熱片、充電機導熱片、電機驅動導熱、電源導熱片、芯片導熱、導熱膠相變化材料以模切類 等相關材料，廣泛應用于動力電池、通訊設備、汽車、電子、LED等領域；
Safid已成為各世界zm電子企業及國內外zm新能源動力電池行業的客戶優先選擇；
企業宗旨：以質量求生存，靠信譽求發展；以行動履行了我們的諾言，經實踐證實了我們的質量。
企業的工作理念（LRHEE）：誠信、求實、和諧、{gx}、創新。
企業的價值觀：以高品質的產品與服務對待每一個我們忠實的客戶。
聯系人：方經理 聯系電話：18550383598
導熱凝膠:
導熱片:
gap filler:
